Naslov (srp)

Нумеричко моделирање делова структуре летелице од вишеслојних композитних материјала у подручју геометријске нелинеарности : докторска дисертација

Autor

Ilić, Ivana D. 1976-

Doprinosi

Petrović, Zlatko, 1951-
Stupar, Slobodan, 1951-
Dinulović, Mirko, 1967-
Simonović, Aleksandar, 1975-
Stefanović, Zoran, 1948-

Opis (eng)

The goal of this research is to establish a suitable numerical procedure, for determining the strength and stiffness of the main landing gear, of the Tactical unmanned aerial vehicle, Pegaz. The main landing gear is of the leaf spring type and is made of layers of Carbon and Glass composite materials, and represents one of the most sensitive parts of UAV. For determining displacement and stress distribution in the leaf spring, the Finite Element analysis (FEA) was performed. Leaf spring behavior is geometrically nonlinear; therefore a nonlinear type of analysis was performed. Mechanical properties of the composite materials used for the leaf spring was experimentally determined. To verify the numerical results, experimental tests on leaf spring were performed. Experimental results of displacement and strength were compared with the numerical results, and a strong correlation was found. This work establishes a reliable and effective numerical approach for the calculation of structural elements made from a composite material, whose behavior is geometrically nonlinear.

Opis (srp)

Циљ истраживања је успостављање погодне нумеричке процедуре за одређивање чврстоће и крутости главног стајног трапа Тактичке беспилотне летелице Пегаз. Главни стајни трап је типа гибња израђеног од вишеслојних композитних материјала, карбона и стакла, и представља један од најосетљивијих делова летелице. За одређивање померања и расподеле напона у гибњу је коришћена метода коначних елемената (МКЕ). Понашање гибња, под дејством оптерећења, залази у област геометријски нелинеарних проблема и при моделирању је коришћен нелинеарни тип анализе. Механичке карактеристике материјала који су коришћени за израду гибња су одређене експериментално. Ради верификације резултата добијених нумеричким путем гибањ је испитан експериментално. Резултати померања као и чврстоћа добијени експерименталним путем су упоређени са нумерички добијеним резултатима и постигнуто је добро слагање. Радом је успостављен поуздан и ефикасан нумерички приступ прорачуна структуралних елемената израђених од композита чије понашање улази у подручје геометријске нелинеарности.

Opis (srp)

Машинство - Ваздухопловство / Mechanical engineering - Aeronautical engineering Datum odbrane: 04.07.2016.

Jezik

srpski

Datum

2016

Licenca

Creative Commons licenca
Ovo delo je licencirano pod uslovima licence
Creative Commons CC BY 2.0 AT - Creative Commons Autorstvo 2.0 Austria License.

http://creativecommons.org/licenses/by/2.0/at/legalcode

Predmet

OSNO - Opšta sistematizacija naučnih oblasti, Mašinske konstrukcije

OSNO - Opšta sistematizacija naučnih oblasti, Tehnika vazdušnog transporta. Aeronautika

Layered composite, Leaf spring, Geometrical nonlinear analysis, Finite element method, Tactical UAV, Failure index, Tsai-Wu failure criterion

OSNO - Opšta sistematizacija naučnih oblasti, Mašinske konstrukcije

OSNO - Opšta sistematizacija naučnih oblasti, Tehnika vazdušnog transporta. Aeronautika

Вишеслојни композити, Гибањ, Геометријски нелинеарна анализа, Метода коначних елемената, Тактичка беспилотна летелица, Коефицијент иницијалног отказа, Tsai-Wu критеријум лома